RISLONE NANO PRIME ENGINE & OIL PERFORMANCE BOOSTER 500ml
- Reduces internal friction by 38% in conventional oils and up to 25% in premium synthetic motor oils.
- Reduces internal wear by 37% in conventional oils and up to 36% in premium synthetic motor oils.
- All of this adds up to increased horsepower, longer engine life and more fuel efficiency – all certified through ASTM testing.
- Features mos2 with ws2 nano technology
- Increases horsepower & torque
- Reduces engine friction, heat & wear
- Repairs by filling & coating rough & worn metal surfaces
- Cleans & prevents sludge
- Most advanced engine and oil additive on the market.
- Perfect for both new and older vehicles, gives extra protection required for today’s lighter weight oils.
Our New Rislone Nano Prime Engine & Oil Performance Booster utilizes ground breaking patented nano-technology to provide engines both old and new with significantly greater protection against friction and wear!
Standard motor oil technology struggles to keep up with the demands of the modern hard-working engines of today and the over worked ones of yesterday, while maintaining stringent emissions standards, oils tends to lack the quality to protect your engine and provide optimum performance and protection. Rislone Nano Prime Engine & Oil Performance Booster solves this issue, working in with all grades of oil, including conventional, high kilometre and synthetic, it turns conventional motor oil into a premium synthetic blend, while increasing the performance of oils across the spectrum.
Rislone Nano Prime Engine & Oil Performance Booster test results have uncovered a 37% and 38% decrease in internal wear and friction respectively when added to conventional oil in petrol, diesel, turbocharged and racing engines. Additionally, engines were proven to have improved horsepower, fuel efficiency and less emissions. Turbos were also protected from overheating and excessive exhaust gas temperatures.
If you’re looking for improved performance and protection, look no further than Rislone Nano Prime Engine & Oil Performance Booster. When added to synthetic oil wear was reduced up to 36%, while friction was reduced up to 25%. Tests were performed under the ASTM testing standards (American Society for Testing and Materials) which are recognised and trusted worldwide.
Under the microscope, engine metal on both high kilometre and new vehicles has rough contact surfaces which contribute to friction and wear, Rislone Nano Prime Engine & Oil Performance Booster contains extremely small tungsten nano-spheres (less than 3 billionths of an inch) which act like microscopic ball bearings moving between metal engine parts, their unique multi-layered round shape acts like a spring cushion, preventing metal-to-metal contact. Under high pressure, the tungsten nano-spheres sacrifice their layers, which attach to and fill in microscopic surface roughness, forming a protective layer on metal surfaces.
Rislone Nano Prime Engine & Oil Performance Booster utilizes a GF-5/SN rated synthetic motor oil carrier and contains additional additives which penetrate bearing surfaces, piston rings and grooves (where sludge and varnish would normally form) and prevent the build up from occurring. The high lubricity formula gradually removes existing deposits, which are suspended in the engine oil and circulated until they are trapped in the oil filter or removed at the next oil change. The overall result is increased performance in all vehicles resulting in reduced friction and wear while helping engines run smoother, cleaner, cooler, quieter and more fuel efficiently.
Uses a fully formulated GF-g/SN rated synthetic motor oil carrier, which is backwards compatible with ALL vehicles. The base synthetic oil helps improve mileage and performance while decreasing emissions, yet designed to work with all oil viscosity grades including - 0W-20, 0W-30, 5W-20, 5W-30, 5W-40, 10W-30 and 15W-40.
The formula is enhanced with synthetic additives including nano-tungsten and moly friction modifiers, anti-wear agents, extreme pressure additives plus Rislone’s famous detergent and dispersant package.
What makes our NANOTECHNOLOGY different?
All engine metal has rough contact surfaces, including new and high-milage vehicles.
Rislone nano-spheres are engineered with a unique round shape for a smooth rolling action, which creates a spring-like cushion for extreme protection. Rislone Nano Prime technology also dramatically enhances anti-friction properties while coating metal surfaces, giving an extra layer of protection to your engine.
How often do I need to use Nano Prime?
When used with a good quality motor oil, Rislone Nano Prime Engine + Oil Booster is designed to be used once per year or with every other oil change.
For best protection use with every other oil change. With the engine off, remove your oil fill cap and pour Rislone Nano Prime Engine & Oil Additive into engine per dosage chart. May be used any time, at or between oil changes. Do not overfill. Safe to use on all vehicles and will not void manufacturer’s new vehicle warranty.
One bottle treats 4.25L to 6.62L quarts of oil for regular vehicles. For larger engines, use 1 bottle for every 5.6 Litres of capacity. On
4-stroke ATV, motorcycle and small engines, use approximately 85mL per 1L of oil capacity.
Do not use in wet clutch applications, as this reduces friction too
FREQUENTLY ASKED QUESTIONS
What is Rislone Nano Prime Engine & Oil Additive?
Rislone Nano Prime Engine & Oil Additive is a synthetic engine antifriction lubricant to help better protect internal engine components including pistons, flat tappet camshafts, lifters, valvetrain and all other parts. This is especially important at engine start up, when most wear is done. That is why they say one of the worst things you can do is start your engine.
Why do I need an Engine & Oil Additive?
Engine oils have become very thin, almost as thin as water. This is in response to government mandates for increased mpg requirements, not to better lubricate the engine. This along with newer start stop technology will increase wear, and decrease the longevity of your engine. Using Rislone Nano Prime Engine & Oil Additive will reduce this wear and increase the life of the engine.
How does Rislone Nano Prime Engine & Oil Additive work?
The common element between all the engine components is the oil. Oil is the life-blood of the engine and is pumped under pressure to the internal parts. Engine oils are generally used to reduce friction between moving parts. In addition to lubricating, motor oil must cool, provide corrosion protection and be a method of removing contaminants. The main parts needing oil for lubrication is the valvetrain including the camshaft & lifters, bearings and pistons. When installed, Rislone Nano Prime Engine & Oil Additive reduces friction which helps cool and lubricates these moving parts better than oil alone. The clinging properties hold the oil to metal parts preventing wear and dry starts. Special additives also prevent oil thinning at high temperatures where normal oil fails. The Nano Tungsten spheres creates the sacrificial (disposable) layer on any component where metal to metal contact happens preventing the metal itself from being worn away. These spheres contain many layers, sort of like an onion. When put under pressure they can shed these Nano thin layers instead of that happening to internal engine parts. They fill and smooth rough and scratched surfaces.
What is a Nano?
The International System of Units states that Nano is a “prefix” that means one Billionth. A nanometer is one-billionth of a meter, for comparison a sheet of paper is 100,000 nanometers thick. These are exceptionally small particles allowing the oil to become a super lubricant.
How much Rislone Nano Prime Engine & Oil Additive do I install?
One bottle of Rislone Nano Prime Engine & Oil Additive is formulated to treat 4.5 to 7 quarts of oil for regular vehicles. For larger engines use one bottle for every 6 quarts of capacity. On 4-stroke ATV, motorcycle and other small engines, use approximately 3 ounces per quart of oil. Do NOT use in wet clutch applications, as this formula is too effective in reducing friction.
Will Rislone Nano Prime Engine & Oil Additive clog my filters?
No, this product will not clog your filters. Nano’s are smaller nearly 1000 times smaller than a single strand of hair, they will pass through your filters without a problem
Does Rislone contain chlorine or any chlorine like additives?
No, Rislone does not condone or produce any engine additive products with chlorine. We are aware of other additive companies which use chlorine and it shows to reduce wear in laboratory testing, but can do damage to engine bearings and other components in real world use.
How long does it take to start working?
Rislone Nano Prime Engine & Oil Additive starts working the minute you install and start driving the vehicle to protect internal engine parts from damaging wear.
Can I use Rislone Nano Prime Engine & Oil Additive in my newer vehicle?
Yes, this formulation is designed to work equally well in new and older engines. Not only will you have a better lubricated & protected engine, but the product contains the tried and true Rislone detergent & dispersant cleaning package that help found the brand. Use of Rislone will not void your new car warranty.
Will it work in synthetic oil?
Yes, this unique Rislone formulation uses a fully formulated GF-5 / SN rated synthetic motor oil that is compatible for all vehicles.
Can it be used with regular petroleum motor oil?
Yes, Rislone works with all petroleum-based motor oils including conventional, high mileage and synthetic formulas. In fact, Rislone Nano Prime Engine & Oil Additive will turn regular petroleum oil into a premium synthetic blend.
When should I add to my engine?
May be used anytime, at or between oil changes.
Will Rislone Nano Prime Engine & Oil Additive effect my oil grade?
No, this product will not change the grade of your oil.
How long does Rislone Nano Prime Engine & Oil Additive last?
When used in combination with a good quality motor oil, Rislone Nano Prime Engine & Oil Additive is designed to be used once per year, or with every other oil change.
Can I use Rislone Nano Prime Engine & Oil Additive in my diesel engine?
Yes, it is recommended to use one bottle for every 6 quarts of oil capacity.