RISLONE RING SEAL 473ml
- Stops noise
- Stops smoke
- Stops Blue Exhaust Smoke
- Reduces Oil Burning
- Seals Worn Pistons & Rings
- Add to Engine Oil Anytime
Blow-by is usually caused by gaps in internal engine parts resulting from excess wear. Rislone’s Ring Seal Smoke Repair is formulated to help stop blue exhaust smoke, reduce oil burning and prevent plug fouling caused by blow-by. Rislone Ring Seal contains viscosity improvers that thicken the oil film, filling these gaps.
The high-shear polymers cushion and coat engine parts and provide a seal for worn pistons and rings to stop blow-by and to help reduce wear and quiet noisy lifters, while retaining oil flow characteristics in both hot and cold weather.
Add entire bottle of Ring Seal Smoke Repair to engine crankcase at or between oil changes. Idle or drive engine for 5 minutes after installation.
Add Ring Seal Smoke Repair every 3500km or with every oil change.
If smoke continues, second application may be required or mechanical attention is needed.
NOTE: One bottle treats 4 to 6 litres of oil for regular 4, 6 and 8 cylinder engines.
For larger engines, use 1 bottle for every 5 litres of capacity.
On 4-Stroke ATV, Motorcycle and small engines, including wet clutch applications, use approximately 93mL per litre of oil capacity.
Rislone Ring Seal Smoke Repair is compatible with ALL 4, 6, 8 and cylinder petrol, diesel and LPG vehicles, including turbocharged engines.
Rislone Ring Seal Smoke Repair works with any conventional, high kilometre and synthetic engine oils, and can be added at any time.
When using in 4-stroke ATV, motorcycles and small engines including wet clutch applications, use 93mL per 1L of engine oil capacity.
Rislone Ring Seal Smoke Repair is only compatible with Rislone Engine Treatment. If you are unsure of what other additives are in the oil system, it is recommended that you drain and flush the engine prior to adding.
FREQUENTLY ASKED QUESTIONS
How does Rislone Ring Seal Work?
Rislone Ring Seal contains viscosity improvers that thicken the oil film, filling in gaps caused by blow-by. It also contains high-shear polymers which provide a seal for worn pistons & rings to stop blow-by from occurring. These polymers cushions and coats engine parts helping to reduce wear and quiet noisy lifters.
How is blow-by caused?
Blow-by is usually caused by gaps in internal engine parts resulting from excess wear.
How long does it take to start working?
Results will either be immediate or noticeable within a few days of driving.
If first application does not completely solve my problem, may I add another bottle?
Yes, for severe problems or badly worn rings, a second application is recommended.
Can I use Rislone Ring Seal in my diesel?
Yes, it works with all petrol and diesel engines using conventional, high kilometre and synthetic oil.
How much do I install?
The 473 mL Rislone Ring Seal, part number 44416, is designed to treat 4 to 6 litres of engine oil. On 4-Stroke ATV, Motorcycle and small engines, including wet clutch applications, use approximately 88mL per litre of oil capacity.
How often should I add Rislone Ring Seal?
Add Ring Seal every 3,500 km or with every oil change.
Will Rislone Ring Seal harm my engine?
No, the product is completely safe to use and will not harm any part of your engine.