RISLONE OIL SEAL ENGINE OIL BURNING & LEAK REPAIR 500ML
- Repairs Leaking Main Seals and Gaskets
- Renews Worn Valve Seals and Guides
- Stops Oil Burning & Blue Exhaust Smoke
- Seal All Other Oil Leaks, Drips and Consumption
Rislone Oil Seal Engine Oil Burning & Leak Repair is the fastest, safest way to solve your vehicles oil consumption issues.
Your vehicle is a good candidate for this solution if it does not use more than one litre of oil per day. Depending on the severity of the leak, the first thing you may notice is the engine oil level decreasing. There may be bluish (blue and/or gray) smoke coming from the tailpipe upon starting the vehicle, more noticeably after it has been sitting for a while, like overnight. Your engine could also be consuming oil and you don’t see any smoke or leaks, as it is being burned gradually.
Use with all types of motor oil, including regular petroleum, high kilometre, synthetic blends and fully synthetic. Can be used to top off oil when low, or to replace a half litre of oil when performing an oil. Rislone Oil Seal replaces Rislone Valve Seal.
Valve Guide Seal Types
Valve Guide Seal Materials
One bottle treats oil capacity from 4.3L to 6.6L. Use ½ bottle for oil capacity from 3.3L to 4.2L. For larger systems use 1 bottle for every 5.6L. On 4-Stroke ATV, Motorcycle and small engines, including wet clutch applications, use approximately 89mL per 946mL of oil capacity.
Turn engine off.
Shake well. Remove the oil fill cap and pour Rislone Oil Seal Engine Oil Burning & Leak Repair into engine per dosage chart. Do not overfill. Reinstall cap.
Drive/idle engine for at least 15 minutes to mix thoroughly with oil and activate product to start working.
Top off engine (add oil as needed) and leave Rislone Oil Seal Engine Oil Burning & Leak Repair in the system for continued protection. Drive vehicle as normal. Most valve seal issues are corrected in 400 kilometres or 3 days of driving. For best results use with every other oil change.
Rislone Oil Seal Engine Oil Burning & Leak Repair is safe to use on petrol, diesel, LPG, turbocharged and racing engines.
Works on all 3, 4, 5, 6 and 8 Cylinder engines, Synthetic and petroleum oil, cars trucks, utes, vans and SUV’s.
Rislone Oil Seal Engine Oil Burning & Leak Repair is compatible with Rislone Engine Treatment, Rislone Engine Oil Supplement with Zinc, Rislone Nano Prime, Rislone Compression Repair and Rislone 710 Oil Treatment.
Note: If you are unsure what other additives could be in the oil system prior to adding Rislone, it is recommended to flush the system first.
FREQUENTLY ASKED QUESTIONS
What is a valve seal?
The simple answer is: A seal that fits around the valve stem and valve guide to prevent oil leakage.
The more detailed answer is: A valve guide seal, also known as a valve stem seal or valve seal, is located on the engine cylinder head inside of the valve springs. An automotive engine can have as few as 8 valves seals, or up to 32. These are located on the intake and exhaust valves and have a pretty difficult job, as they need to allow some oil to pass (so that the valve stem and guide receive lubrication), but need to prevent larger amounts of oil from entering into the combustion chamber to be burned. When too much oil is burned the vehicle will consume oil, emit blue exhaust smoke and cause valve carbon build up. This is bad for the environment, and also the emission system on the vehicle.
What are the symptoms of a valve seal leak?
Depending on the severity of the leak the first thing you may notice is the engine oil level decreasing. There may be bluish (blue and/or gray) smoke coming from the tailpipe upon starting the vehicle, more noticeably after it has been sitting a while, like overnight.
What causes the valve seal to leak?
The most common cause of valve seal leaks is age and/or high kilometres. The seal can also leak due to the vehicle being stored for an extended period of time. Extended storage in particular causes drying and hardening of the seal which leads to shrinking and cracking, and consequently leaking.
What other factors can contribute to a valve seal leak?
A few things can cause a valve seal to leak that is not the fault of the seal itself. The number one factor would be clogged oil drain back returns in the head. These are passages that allow the oil that has been pumped under pressure to the cylinder head for lubrication, to be returned by gravity back into the oil pan. If these passages become partially clogged, oil will fill under the valve cover, actually submerging or flooding the valve seals in oil, and they were not designed to work this way. The usual solution for this is removing the valve cover(s) and running a wire down the return holes to clean them out. This is labour-intensive and expensive.
How does Rislone Oil Seal Engine Oil Burning & Leak Repair work?
This product works in two ways to help solve most any valve seal type leak.
1) A specially-engineered seal restorer additive restores valve seal size, flexibility and elasticity lost due to engine heat, age and high kilometres.
2) An advanced seal polymer works by building a polymeric film around the valve seal to help prevent excess oil from bypassing the seal during normal engine operation.
What types of valve seals will Rislone Oil Seal Engine Oil Burning & Leak Repair fix?
Because of the Rislone multi-action formula, the solution has a custom additive package to work on any type of valve seals, no matter the type or material.
Do I need to use Rislone Oil Seal Engine Oil Burning & Leak Repair with every oil change?
In most cases the valve seal issue will be repaired with a single dosage. But for best results and to prevent the problems from reoccurring, use with every other oil change.
Will Rislone Oil Seal Engine Oil Burning & Leak Repair clog my oil filter?
No. Rislone Oil Seal has no particles to plug the leak. Instead, its technology relies on special polymers and seal conditioners to stop valve seal leaks permanently.
"Can’t believe how quickly this product worked, day 2 and no more smoke at start up! Peace of mind for under $60."
Technical Data Sheet